Discover GeoMax X-Pole Solution

Discover-GeoMax-X-Pole.jpg

GeoMax X-Pole solution enables you to enhance your GeoMax Zoom90 Total Station and GNSS Receiver to increase performance.

By combining the advantages of both systems, the X-Pole solution significantly improves flexibility onsite.

Sometimes points cannot be easily measured with TPS due to limited prism visibility, but now you can decide between TPS to GNSS mode.  The seamless integration of X-Pole into the field software allows a toggle between both measurement modes.

Once those points are measured, one button switches it back to TPS mode. This enhances the efficiency of the system, since it eliminates the need for cumbersome and time consuming station setups.

How to use GeoMax X-Pole Solution:

  • To calculate the TPS position you need some known points.

  • In free station mode you can measure your points with the GNSS receiver and immediately measure the same with TPS (you need to define a coordinate system).

  • TPS position is calculated and oriented in the GNSS reference system.

GeoMax X-Pole solution consists of :

  • GeoMax Zoom90 robotic total station

  • 360° prism with 5/8” screw (GRZ122)

  • GeoMax Zenith15/25/35 GNSS receiver

  • X-PAD Survey software version 3.0 (or higher)


We’re here to help, if you have any questions or would like a demo, give us a call on 0800 443 6629 or enquire below.


Previous
Previous

GeoMax Zenith15 Rover & Base Station [NEW]

Next
Next

Locate Underground Small Diameter Pipes [Video]