GeoMax Zenith40

POA

Zenith40 is the true flagship of the GeoMax GNSS receivers. Equipped with NovAtel`s latest, cutting-edge measurement engine and supporting fast converging Precise Point Positioning (PPP), this antenna provides a highest level of technology and meets the toughest MIL standards.

Zenith40 assures a workflow tailored to your needs thanks to the user-centered X-PAD Ultimate field software or the flexibility to run your own software on any field controller. The combination of all this in a GNSS smart-antenna creates an industry leading solution.

Package includes:

  • GeoMax Zenith 40 GNSS Receiver
  • GPS, GLONASS, BeiDou, Galileo & QZSS
  • ZBA201 Li-ion Battery
  • ZCH201 Charger for Li-ion Battery
  • GEV192 AC/DC Adapter GK112
  • ZRA101, Gainflex UHF Antenna (Frequency Range 400-473 MHz)
  • FZ-B2 Panasonic Tablet
  • Full X-Pad Ultimate Software
  • Zenith40 Accessory Kit: Case, Micro SD Card & USB
  • ZPC200 Telescope Carbon Fibre and Aluminium pole ZHR200, Pole Bracket for Controller

X-Pad Software:

GeoMax X-PAD field software is available in two tailored versions: One for surveyors and one for construction professionals supporting Windows and Android operating systems.

Due to the close cooperation with key-users all around the world, X-PAD Ultimate is continuously kept up-to-date and convinces due to its perfect balance between clear structure, straight forward workflows and high functionality.
The GeoMax software offering is completed by X-PAD Fusion, a fully featured office software that even enables automatic point cloud registrations.

X-PAD Fusion has the versatility and flexibility to fuse all data types from both GeoMax sensors and other 3rd party sources such as drones. The data is then compiled in one database which eliminates the risk of data loss as well as the need for time consuming data conversions.

Product Description

SPECIFICATIONS:

Receiver Specifications
Q-Lock ProTM Functionality

 

Lowest noise and advanced mutipath

mitigation

for highest reliability

Reliabiliy 99.99%
Measurement Engine NovAtel OEM7, 555 channels,

multi-frequency / -constellation

GPS tracking  L1, L2, L2C, L5
GLONASS tracking L1, L2, L2C, L3*
BeiDou tracking B1, B2, B3* (opt)
Galileo tracking E1, E5a, E5b, AltBOC, E6* (opt)
QZSS tracking L1, L2C, L5, L6* (opt)
NavIC L5*
Positioning rate 5 Hz, 20 Hz (opt)
SBAS EGNOS, WAAS, MSAS, GAGAN
Precise Point Positioning (PPP) TerraStar C Pro ; GPS/ GLONASS/

BeiDou/ Galileo/ QZSS (opt);

Reconvergence < 1 min

Receiver accuracy (rms)**
RTK Hz 8 mm ± 1 ppm

V 15 mm ± 1 ppm

Network RTK Hz 8 mm ± 0.5 ppm

V 15 mm ± 0.5 ppm

Static

 

Hz 3 mm ± 0.5 ppm

V 5 mm ± 0.5 ppm

 

Static – long

 

Hz 3 mm ± 0.1 ppm

V 3.5 mm ± 0.4 ppm

TerraStar C Pro PPP

 

Hz < 2.5 cm

V < 5 cm

Interfaces
LED status indicators Position, battery, Bluetooth®,

RTK receive, RTK transmit,

data storage

LED mode indicators Rover, base, static
Data recording Removable microSD card
GSM/TCP/IP Removable SIM card
Communications
UHF radio module SATEL, 500mW, 1000 mW transceiver,

403 – 473 MHz; (opt)

Bluetooth® Device class II

QR-iConnect functionality

TNC connector High sensitivity, UHF antenna
Communication port USB, serial & power
Physical Specifications
Environmental protection (water & dust) IP68
Shock Withstands 2 m drop onto hard surface
Power Supply
Internal battery Removable, Li-Ion 2.6 Ah / 7.4 V
Operating time 9 h in static / 6 h in rover mode

* Glonass L3, BeiDou B3, Galileo E6, QZSS L6 and NavIC L5 are foreseen to be provided through future firmware upgrade.
** Measurement precision, accuracy, reliability and time for initialisation are dependent upon various factors including number of satellites, observation time, atmospheric conditions, multipath etc. Figures quoted assume normal
to favourable conditions. A full BeiDou and Galileo constellation will further increase measurement performance and accuracy.
*** Depending on device configuration; w/o battery

Download the Zenith40 Brochure